VEC225
TWO YEAR LIMITED WARRANTY REGISTRATION FORM
This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of
Vector Manufacturing, Ltd., regarding this product. There is no other warranty, other than those described herein.
This Vector Manufacturing, Ltd. product is warranted, to the original purchaser only, to be free of defects in materials
and workmanship for two years from the date of purchase without additional charge. The warranty does not
extend to subsequent purchasers or users. Vector Manufacturing, Ltd. will not be responsible for any amount of
damage in excess of the retail purchase price of the product under any circumstances. Incidental and conse-
quential damages are specifically excluded from coverage under this warranty.
MINI FRIDGE DELUXE
COOLER & WARMER
This product is not intended for commercial use. This warranty does not apply to accessories or damage to units
from misuse or incorrect installation. Misuse includes wiring or connecting to improper polarity power sources.
RETURN/REPAIR POLICY: Defective products, other than accessories, may be returned postage prepaid
to Vector Manufacturing. Any defective product, other than accessories, that is returned to Vector Manufacturing
within 30 days of the date of purchase will be replaced free of charge. If such a product is returned more than
30 days but less than two years from the purchase date, Vector Manufacturing will repair the unit or, at its option,
replace it free of charge. If the unit is repaired, new or reconditioned replacement parts may be used, at Vector
ManufacturingUs option. A unit may be replaced with a new or reconditioned unit of the same or comparable
design. The repaired or replaced unit will then be warranted under the terms of the remainder of the warranty
period. The customer is responsible for the shipping charges on all returned items after 30 days. During the
warranty period, Vector Manufacturing, Ltd. will be responsible for the return shipping charges.
THERMOELECTRIC ADVANCED COOLING TECHNOLOGY
OPERATES FROM SUPPLIED AC/DC CONVERTER OR
ANY VEHICLE’S 12 VOLT ACCESSORY SOCKET
LIMITATIONS: This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from
normal wear and tear (including chips, scratches, abrasions, discoloration or fading due to usage or exposure
to sunlight), accidents, damage during shipping to our service facility, alterations, unauthorized use or repair,
neglect, misuse, abuse, failure to follow instructions for care and maintenance, fire, flood and Acts of God.
If your problem is not covered by this warranty, call our Technical Support Department at (954) 584-4446 or toll
free at (866) 584-5504 for general repair information and charges if applicable. You may also contact us through
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations on
how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the
exclusions or limitations stated herein may not apply. This warranty gives the purchaser specific legal rights; other
rights, which vary from state to state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Vector Manufacturing Technical Support
by telephone, fax or mail. We suggest that you keep the original packaging in case you need to ship the unit.
When returning a product, include your name, address, phone number, dated sales receipt (or copy) and a
description of the reason for return and product serial number. After repairing or replacing the unit, we will make
every effort to return it to you within four weeks.
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector Manufacturing. Enter
VEC225 as Model. All Vector Manufacturing, Ltd. products must be registered within 10 days of purchase to
activate this warranty. Mail the completed registration form, along with a copy of the original sales receipt to:
ATTN.: CUSTOMER SERVICE / VECTOR MANUFACTURING, Ltd.
4140 SW 28th Way, Ft. Lauderdale, FL 33312
•
•
PH: 954-584-4446 TOLL FREE: 866-584-5504 Fax: 954-584-5556.
❑
❑
Please activate my Limited Warranty for Model VEC225
I have enclosed a copy of the original sales receipt.
OWNER’S MANUAL &
WARRANTY INFORMATION
Name
___________________________________________________________________________________
Street Address ________________________________________________________________________________
City __________________________________________________ State ________ Zip code_________________
Phone _____________________ Fax _____________________ E-mail __________________________________
Item Purchased ________________________________________________________________________________
Date of Purchase _____________________ Store Where Purchased ___________________________________
UPC Number from package (12 digits) ___________________________________________________________
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING THE OPERATION AND WARRANTY
OF THIS PRODUCT. PLEASE READ CAREFULLY BEFORE USE AND RETAIN FOR FUTURE REFERENCE.
4140 SW 28TH WAY, FT. LAUDERDALE, FL 33312
TEL: 954-584-4446 • FAX: 954-584-5556 • TOLL-FREE 866-584-5504
FEATURES (See Figure 1)
CAUTIONS
• This unit is intended for use with the supplied 12 volt DC power source (converter)
that can provide at least 4 amperes of current. DO NOT attempt to use with
any power source that provides less than 4 amperes at 12 volts DC.
• NEVER operate unit in an enclosed space. ALWAYS ensure that there is adequate
ventilation and free flow of air around the unit, so that warm air expelled by
the fan (in the rear of the unit) is effectively dissipated.
• Microprocessor controlled for digital accuracy.
• Pushbuttons digitally set temperature.
• Displays set temperature or current temperature in °C or °F.
• Operates upright - refrigerator style.
• Interior lamp automatically lights when door is opened.
• Use with standard household containers or ready-to use packaging.
• Rests on vehicle floor or tailgate for easy access.
• Extra-long, 7-foot, 12 volt DC power cord with 12 Volt DC plug; equipped with
replaceable 10-amp fuse to protect the unit and power source.
• Durable, weather resistant construction and easy-open and close door.
• Environment-friendly CFC-free polyfoam liner.
• When operating the unit in a vehicle or boat cabin, adequate ventilation must be
provided by an air conditioning system or open window. In a car with windows
up, air temperatures can reach 150 °F.
• This unit is not designed to be built-in or recessed - this would interfere with the
unit’s air dissipation system, and could cause a fire or other safety hazard.
• Use only with the supplied power cord. If cord becomes worn or damaged,
discontinue use and call Vector Customer Service Department for an authorized
replacement.
• Never allow the cooler/warmer or AC/DC converter to be immersed in water
or other liquid. This will void the warranty.
• Make sure the AC/DC converter is connected to 110 V AC, 60 Hz power.
• Do not leave plugged in. Disconnect AC/DC converter when not in use, or when
cooler is turned OFF.
• Cold/heat transfer to foods via temperature-efficient liner.
• Built-in heat dissipation fan with long-life, brushless motor.
• Full range user set thermostatic temperature control.
• Digital Display shows internal temperature.
• Removable door compartments.
• Removable interior shelf to allow larger packages to fit.
• Automatic shut-off to prevent overheating of unit.
• Replaceable interior lamp.
USE AS COOLER OR WARMER
• Indoor operation using the supplied AC/DC converter.
• Compact, lightweight, completely portable - use with supplied AC/DC converter
or with vehicle or boat’s 12 volt DC accessory outlet.
• Non-wearing thermoelectric system cools to approx. 40 °F or warms to approx.
120 °F from surrounding air temperature.
Figure 2 details the locations of the Digital Display and the Pushbuttons.
1. Start vehicle, or turn ignition to accessory position.
2. Insert the Power Cord’s DC plug into the converter or vehicle’s 12 volt DC
accessory outlet and the other cord connector into the receptacle on rear of
cooler/warmer. Refer to either CONNECTING TO THE SUPPLIED AC/DC
CONVERTER or CONNECTING TO PORTABLE DC POWER SUPPLY, if required.
3. Press the ON/OFF Power Pushbutton. The Digital Display will light.
4. Press and hold down either the COOLER or WARMER button to set the desired
temperature. The Digital Display will show the desired temperature.
• Attractive stainless steel door (see cover photo)
FIGURE 1 - FRONT VIEW
REMOVABLE
TRAY
LAMP SWITCH
DOOR
FIGURE 2 - CONTROLS AND INDICATOR PANEL
INTERIOR
LAMP
POWER ON/OFF PUSHBUTTON
WARMER PUSHBUTTON *
DIGITAL TEMPERATURE DISPLAY
REMOVABLE
SHELF
COOLER PUSHBUTTON *
HINGES
* Press both buttons at same time to change from °F to °C
NOTES: The display will automatically change back to display the current
temperature after releasing the button.
Pressing both COOLER and WARMER at the same time changes the display to
°C or °F.
CONTROLS AND INDICATOR PANEL
3
4
5. Put items into the unit and close the door. Do not overstuff the unit or keep the
door from closing.
CONNECTING TO A PORTABLE 12 VOLT DC POWER SUPPLY
• Insert the 12 volt DC plug on the power cord into the 12 volt DC socket on the
portable power supply and the other end of the power cord into the receptacle
on the rear of the cooler.
6. Keep door closed during operation and re-close it quickly when adding items
to the unit or removing items from it.
7. After use, press the Power pushbutton to turn OFF the unit then empty the unit.
8. Disconnect the power cord from the converter or accessory outlet and from the
unit. Disconnect the converter from AC.
9. Clean unit as described in the Care & Maintenance section of this manual.
10. Store in a cool, dry area out of direct sunlight.
•
Continue operating the cooler/warmer as described under USE AS A COOLER
WARMER.
• Observe all CAUTIONS AND WARNINGS
Note: With a current draw of approximately 3.6 amps (44 watts), the unit will
operate for approximately 1.2 hours from a fully charged 12 volt DC portable
power supply, such as the Vector Pocket Power (Model #VEC018). A standard
19 Ampere Hour Jumpstarter/Power Supply such as the VEC021 or VEC020
series - can operate the cooler/warmer for approximately 4.8 hours.
CAUTIONS
• The unit can take up to 2 hours to reach its optimum set temperature if the set
temperature is an operating extreme (approx. 40 °F to warm temperature 120 °F).
It is recommended that items to be placed in the unit are at the correct temperature.
This will assist the unit in reaching the desired temperature as quickly as possible
• The unit will continue to operate as long as power is applied to it and it is
turned ON.
CARE AND MAINTENANCE
The Mini Fridge Deluxe Cooler and Warmer is ruggedly constructed to provide
years of dependable service.
• If the vehicle engine is turned off, the unit will continue to draw power (a nominal
3.6-amps or 44 watts) from the vehicle battery.
• If the engine is switched off for a long period (overnight) it is important to
disconnect the unit from the accessory outlet to avoid draining the vehicle’s battery.
•
•
After each use, clean the unit, inside and out, with a soft cloth and mild soap solution.
Do not scrape, scratch or puncture the surface of the unit with sharp objects or abrasives.
• Dry the unit properly and store in a cool, dry place.
• Always make sure the power cord and converter are disconnected before storing.
• Never allow the unit to be immersed in liquid.
WARNINGS
• Food will stay at desired temperature for some time after the unit is disconnected or
turned off, but the temperature will eventually change to that of the surrounding air.
• Observe common sense hygiene rules, as with any cooling/heating unit. Do not
eat or drink perishable items that may have spoiled or become contaminated
from lack of proper temperature control.
TROUBLESHOOTING
PROBLEM/POSSIBLE CAUSE/REMEDY
• Accessory outlet of DC power supply is not functioning-check by plugging in a
different (less than 4 amp) 12 Volt DC appliance. If not, clean accessory outlet
and reconnect the Mini Fridge Deluxe Cooler and Warmer .
• Fuse or circuit breaker in accessory outlet is open. Reset breaker or check fuse,
and replace fuse if necessary. (See paragraph below)
• Ignition is switched off - start engine or switch ignition to accessory position.
• Fuse in unit’s DC power plug is blown - see Fuse Replacement section for location
of fuse and instructions for checking and replacing fuse.
CAUTIONS
• The unit is intended to maintain the temperature of pre-cooled or pre-heated
food and beverages; it is not designed to warm cold items or to heat cold items.
CONNECTING TO THE SUPPLIED AC/DC CONVERTER
REFRIGERATOR/WARMER IS NOT COOLING OR HEATING PROPERLY
(FAN IS NOT TURNING).
• Fan is defective. Call Vector Customer Service Department for return/replacement
instructions. This unit is not user-serviceable, it must be returned to Vector
Manufacturing for professional service or repair. Any attempt to service by user
will void warranty.
PLUGS INTO REAR
OF COOLER
FIGURE 3 - VEC002 AC/DC Converter
R
EFRIGERATOR/WARMER IS NOT COOLING OR HEATING, BUT FAN IS TURNING.
• Cooling unit is defective. Call Vector Customer Service Department for return/
replacement instructions. This unit is not user-serviceable, it must be returned to
Vector Manufacturing for professional service or repair. Any attempt to service by
user will void warranty.
12 VOLT DC SOCKET
FUSED DC PLUG
• Plug supplied Vector VEC0024 ampere converter’s power cord into standard 110
Volt 60 Hz outlet.
REFRIGERATOR/WARMER TAKES LONGER THAN 2 HOURS TO REACH
DESIRED TEMPERATURE INSIDE.
•
Insert the 12 Volt DC connector of the cooler/warmer into the socket on the converter.
• Low battery or supply voltage. Check converter output.
• Unit will attain desired temperature more efficiently if items are pre-heated or
pre-chilled.
• Connect the other end of the cooler’s power cord into the polarized receptacle
on the rear of the cooler.
• Continue operating the cooler/warmer as described under USE AS A COOLER
WARMER.
• Fan area is blocked - Move unit or object.
5
6
FUSE REPLACEMENT
The power cord is fuse-protected against short-circuiting, by a 10-amp fuse located
in the tip of the DC power plug. If the DC socket is powered, but the unit does not
operate, then the cooler/warmer fuse may be open.
To inspect or replace the DC Power Cord Fuse
1. Unscrew the end-cap of the DC plug counterclockwise.
2. Remove fuse, inspect it for an open element, and replace with a new 10 amp
fuse, if needed.
3. Re-attach the end-cap to the plug.
4. If new fuse opens, call Vector Customer Service Department for further instructions
and possible return/replacement. This unit is not user-serviceable, it must be
returned to Vector Manufacturing for professional service or repair. Any attempt
to service by user will void warranty.
LAMP REPLACEMENT
At the inside top of the cooler there is a lamp that lights when the cooler door is
opened. If the lamp does not light when the door is opened, and the unit is powered,
the cartridge type bulb should be replaced. These are available from most automotive
supply stores. Replace the bulb with one that is the same type and rating.
1. Disconnect all power to the cooler/warmer
2. Empty the cooler of it’s contents
3. Turn the cooler upside down so that the lamp assembly is down and is accessible.
4. Slide the clear plastic cover part way towards the front of the unit.
5. Lift the clear cover and expose the bulb
6. Using a paperclip, form a half-inch hook at one end.
7. Hook the paperclip under the bulb at one end and lift the end of the bulb.
8. The bulb will disconnect from the springs of the socket.
9. Place the new bulb between the socket springs.
10. Replace the clear plastic cover by reversing the removal actions.
11. Turn the unit right side up.
12. Apply power and open the door.
If there are any problems call Vector Technical Support Toll Free (866) 584-5504.
SPECIFICATIONS
Capacity . . . . . . . . . . . . . . . . . . . . . . . 21 twelve oz. cans /16 Liter/4.2 Gallons (US)
Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Volt DC
Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . 7', with fused 12 Volt DC power plug
Replaceable fuse in DC Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Amps
Replaceable Interior Lamp . . . . . . . . . . . . . . . . . . . . . 12V, 3.6 watt cartridge (Festoon)
AC/DC Power Adapter . . . . . . . . . . . . . . . . . . 110 Volt AC to 12 Volt DC at 4 Amps.
Amperage Draw . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6 Amperes (approx. 45-watts)
Cooling Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cools to average 40 °F
Warming Performance . . . . . . . . . . . . . . . . . . . . . . Warms to 60 °F above surrounding
air or 120 degrees maximum
Cold/Heat Transfer . . . . . . . . . . . . . . . . . . . . . . .Temperature-efficient, easy clean liner
Insulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CFC-free liner
Heat Dissipation . . . . . . . . . . . . . . . . . . . . . . Built-in fan with long-life, brushless motor
Warm/Cool System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Non-wearing thermoelectric
Outside Dimensions . . . . H 19in. (48.3cm) x W 11.5 in. (29.3cm) x D 11.25 in. (28.6cm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.65lbs (6.19 Kg)
7
8
|