Toshiba Thermometer HT 201 User Manual

Safety Precautions  
Be sure to observe the following precautions  
This section lists important precautions that users of this Product (and anyone else) should observe in order to avoid injury to you and any third person and damage to property.  
■ Explanation of Labels  
Explanation of Graphic Symbols  
Indicates “prohibited actions” within or near the  
graphic symbol using an appropriate picture or  
text.  
IIndicates “a hazardous situation which, if not observed,  
could result in death or serious injury”.  
Prohibited  
Instruction  
Indicates “a potentially hazardous situation which, if  
not avoided, may result in minor or moderate injury or  
cause property damage”.  
Indicates “actions that must be undertaken for  
safety purposes” by using an appropriate picture  
or text within or near the graphic symbol.  
Model number  
HT-201  
Thank you for purchasing this Digital Clinical Thermometer.To use this Digital Clinical  
Thermometer correctly and safely,please read all of the instruction manual provided by  
TOSHIBA carefully and keep in mind the before using this Product.  
After reading the manual, please keep it at hand so that others can refer it at any time.  
This Product is not intended to diagnose any disease. Please do not use the measurement result to  
diagnose by yourself and consult with a medical doctor if you do not feel well.  
* Specialized smartphone application is available. Visit the following site to confirm.  
* The information in the Manual (except for product specification and design) may be changed  
without prior notice.  
Do not allow children to use, and keep this Product out  
Do not bite or bite off the measurement area of this Product.  
(Attempting to do so may cause an accident such as accidental swallowing.)  
In case of accidental swallowing, consult with a medical doctor immediately.  
of reach from small children.  
If you allow this Product to use small children, this Product  
may cause their injury.  
Illustrations in this instruction manual are schematic figures of this Product.  
Prohibited  
Prohibited  
Do not heat the battery or place the battery in a fire.  
Specifications  
Do not use this Product for any purposes other than  
taking your body temperature.  
(Using this Product on other living things such as your pets  
or other animals may cause their injury.)  
(Attempting to do so may cause injury due to battery rupture or similar.)  
Measurement  
range  
Product name  
Digital Clinical Thermometer  
HT-201  
33.00 to 42.00ºC  
Do not attempt to self-diagnose or self-treatment based on  
the measurement result.  
(Attempting to do so may cause worsening of symptoms.)  
Please consult with a doctor when seeking medical attention.  
Model number  
Usage Environment Ambient temperature: + 10 to + 40ºC  
Generic name  
Supply voltage  
Battery life  
Electronic thermometer  
DC 3 V (CR2032 battery × 1 pc)  
Do not take your body temperature anywhere other  
than in-oral (armpit, ear, etc.).  
(Using this Product in areas other than the mouth may cause  
 temperature and  
Relative humidity: 30 to 85% RH  
(without condensation)  
 humidity  
Keep batteries or the battery cover out of reach from small  
children.  
Approx. 1 year (under the usage condition of   
room temperature 23ºC, measurement for  
7 minutes 1 time/day, data transfer 1 time/day)  
your injury or result an incorrect measurement.)  
Storage Environment Ambient temperature: - 10 to + 50ºC  
(To prevent small children from swallowing batteries or the battery cover  
accidentally.) If this Product is swallowed, consult with a medical doctor  
immediately.  
This Product is exclusively designed for oral use.  
 temperature and  
Relative humidity: 30 to 90% RH  
(without condensation)  
Do not share this Product among multiple persons.  
(Attempting to do so could cause infectious disease.)  
Temperature  
 humidity  
Four-digit with ºC display in increments of 0.01ºC  
display  
Main unit’s weight  
Outline Dimensions  
Accessories  
:Approx. 20 g (including battery)  
Measurement  
± 0.05ºC (35.00 to 38.00ºC)  
precision  
:Approx. 46 (W) × 99.5 (L) × 11 (T) mm  
± 0.10ºC (33.00 to 34.99ºC, 38.01 to 42.00ºC)  
(measured in a constant temperature water  
tank at a normal room temperature of 23ºC)  
Do not disassemble, repair or modify this Product.  
Use a battery designated in the Manual.  
( Attempting to do so may cause trouble or damage of  
this Product and result an incorrect measurement. )  
(Using an undesignated battery may cause injury and disaster  
due to heat generation, rupture, leakage, or ignition of the battery.)  
Temporary CR2032 lithium battery  
( installed in the product ):1pc,  
Storage case :1pc,  
Measurement  
Predictive-type (compatible with predictive  
temperature measurement and actual  
temperature measurement)  
Set the battery in this Product correctly so that “+” and “-“  
method  
Prohibited  
Instruction are in their proper positions.  
( Incorrect setting of the battery may cause injury and disaster  
Instruction manual :1pc  
due to heat generation, rupture, leakage, or ignition of the battery.)  
Part Names  
Usage Precautions  
[Thermometer Main Unit]  
Do not take your body temperature by using this Product that has been  
stored outside the range of the storage environment temperatures as  
set the above.  
(Storage outside the range of the storage environment temperatures may  
cause trouble of this Product and result an incorrect measurement.)  
Do not drop, step on or otherwise apply a strong shock to this  
Product or the storage case.  
Display  
Operation button  
(Such usage may cause trouble or damage to this Product and result  
an incorrect measurement.)  
Measurement area  
Body Temperature Transfer Symbol  
Shows the state ready to transfer body temperature data to your  
smartphone.  
Be careful so that fluid or water does not enter into this Product.  
(This Product is not designed as fully waterproof. Entry of water into  
this Product may cause trouble of this Product.)  
Do not use this Product in a place where a strong static discharge or  
electromagnetic radiation occurs, or near a magnet.  
(Such usage may cause trouble or damage to this Product and result an  
incorrect measurement.)  
Battery cover  
See the reverse side of  
this document for how to  
replace a battery.  
Previous Value Memory Symbol  
Shows the body temperature value measured last time.  
[Stored State]  
Remaining Battery Symbol  
Shows the remaining battery level in four increments.  
Warranty  
1. The warranty period is one year from the date of your purchase of this  
Product. If trouble occurs under your normal use to follow the Manual,  
Toshiba will replace such defective Product with a new or an equivalent  
product. Any documents evidencing your purchase of this Product, including  
purchase date and location must be provided to Toshiba for replacement.  
Keep such documents in a safe place.  
4. Even within warranty period as set forth in the above, in case that  
one of the following occurs, Toshiba provides you with repair or  
replacement service, subject to your payment of Toshiba’s  
designated fee .  
Predictive Symbol  
Shows a temperature value that is measured by the predictive  
function.  
Storage case  
Failure or damage caused by improper use, storage, or this Product  
tampering and repair.  
For Correct Measurement  
 ・Failure or damage caused by drops or shock.  
 ・Failure or damage caused by disasters(fire, flood, earthquake) or  
a Force Majeure.  
2. Toshiba will in no event be responsible for the deletion of any data or  
application stored on this Product.  
● Make sure that the temperature is taken at the base of tongue.  
● Please refrain from using this Product after eating or drinking.  
● Please refrain from using this Product after exercise.  
3. In case of the trouble this Product occurs within warranty period as  
set forth in the above, please contact Toshiba customer service.  
 ・Failure or damage unrelated to this Product.  
 ・Consumables. (battery, storage case)  
 
How to Take Your Temperature  
How to replace the battery  
● Take your body temperature as soon as you wake up and while you are still in bed.  
( Measurement after getting up or a meal may result an incorrect measurement. )  
● Whenever you measure your body temperature by using this Product, please measure  
the same point in your mouth  
● Measurement should be conducted by using this Product at the same time every  
morning to the extent possible  
[Display]  
Upon pushing the operation button, the remaining battery is indicated in four levels  
such as “   >    >    >    ” (battery level low). Replace the battery  
promptly in accordance with the following procedures when “   ” is indicated.  
Measurement is impossible when   ” is indicated.*Enclosed battery when  
you purchase this Product is for the temporary use and it may run out faster than usual.  
Power Off (Blank screen)  
Piii  
Whole symbols on the screen  
Previous value is displayed.  
Estimation measurement starts.  
Under taking a temperature  
Remaining battery symbol  
■ Battery Replacement Procedure (CR2032 lithium battery × 1 pc)  
1. Insert a Pointed Object, Such as a Tooth Pick, into the Hole on the Back Side  
1. Take Out this Product from the Storage Case. Push the Operation Button at least One Second.  
• The power turns on and the display indicates all symbols with a beeper sound.  
[Back Side of Main Unit]  
of this Product (Fig.1), Slide Out the Battery Cover by Using the Pointed  
Object (Fig.2), andPull Out the Battery Cover (Fig.3).  
• The previous value is displayed, and then “  
” is displayed.  
Old battery  
• When the ambient temperature exceeds 33ºC, the product may display the ambient  
temperature due to a warm measurement area.In such cases, turn off the power once and cool the measurement  
area, and then take your temperature.  
New battery  
Hole (Two points)  
2. Remove the Old Battery (Fig.4).  
(5)  
(4)  
3. Wait for About at least approximately 10 Seconds to Prevent Malfunction of this  
2. When this Product Displays “Lo” , Place the Measurement Area on Either the Right or Left  
Side of the Base of Your Tongue with the Display of this Product upwardly. Hold this Product  
with Your Tongue and Shut Your Mouth. Hold this Product with Your Hand to prevent the  
Mesurement Point in Your Mouth.  
(1)  
(2)  
Product, And Then Set the New Battery with the “+” Side Upwardly (Fig.5).  
(3)  
(6)  
Please do not insert a battery directly into this Product. It may cause trouble of this Product.  
4. Attach the Battery Cover So That the cover is Inserted into this Product  (Fig.6).  
Wait for  
10 seconds.  
5. Push the Operation Button and Check that “  
” is Displayed.  
■ Precautions in Replacing a Battery  
● Replacing the battery deletes your body temperature data stored in this Product. Transfer the temperature data to your smartphone  
before replacing the battery.  
● When disposing of a used battery, please follow all applicable laws and regulations in which it is being used.  
● Keep batteries and the battery cover away from small children to prevent their accidental swallowing.  
PiPi PiPi  
PiPi  
Completion of estimation  
measurement  
• When a beeper sound goes off in approximately one minute and “ºC” is indicated on the display, an predictive  
measurement is successfully completed.Check your body temperature measurement result ( predictive temperature value ).  
• Measurement in an incorrect manner may result an incorrect measurement.  
Troubleshooting  
Turn Off the Power by Pushing the Operation Button for at least One Second.  
• The power is automatically shut down after a certain period of time lapse even if the operation button is  
not pushed.  
3.  
Problem  
Probable Cause  
Remedy  
Scattering in measurement  
values  
Placed the measurement area in different  
positions for each measurement or opened  
your mouth during measurement.  
See the “ For Correct Measurement ” and ” How To Take  
Your Temperature ”.  
4. Put this Product into the Storage Case.  
Actual Measurement  
PiPiPi  
PiPiPi  
PiPiPi  
* If you want to measure your body temperature strictly, we recommend that you should take an actual body  
temperature.Keep on taking your body temperature after the beeper sound in step 2 above. The actual temperature  
measurement is successfully completed when the beeper sound goes off once again after approximately 5 minutes  
lapse. Check the result of the actual measurement and continue with steps 3 and 4 above.  
Completion of actual  
temperature measurement  
A trouble has occurred in this Product during  
predictive temperature measurement.  
See the “ For Correct Measurement ”and ” How To Take Your  
Temperature ”. A redictive measurement value is not correctly  
estimated if the measurement area is taken out of your mouth  
during predictive temperature measurement.  
“Er.03” is displayed.  
Transfer your body temperature data in this Product to your smartphone  
Keep on measurement ( for actual temperature measurement )  
or turn off the power of this Product once and take your body  
temperature again after at least 30 seconds lapse.  
● If “ ” is displayed, data transfer to your smartphone is available.  
“Er.11 to 19” is displayed.  
Measurement has not been conducted in the  
correct manner.  
See the “ For Correct Measurement ” and ” How To Take Your  
Temperature ”.Turn off the power of this Product once and take  
your body temperature again after at least 30 seconds lapse.  
Delete your body temperature data in this Product  
Completion of data deletion  
● Push the operation button of this Product at least 10 seconds while this Product is powered on.  
Upon pushing the operation button even after this Product is powered off, four “□ ” are displayed and your body  
temperature data in this Product is deleted. If you release the operation button before four “□ ” are displayed, the  
data will not be deleted.  
Take your body temperature again after placing this Product in a  
+10 to +40ºC environment for at least one minute  
“A.Hi” is displayed.  
“A.Lo” is displayed.  
The thermometer has been stored in a place  
where the temperature is higher than +40ºC.  
Take your body temperature again after placing the thermometer in a  
The thermometer has been stored in a place  
+10 to +40ºC environment for at least one minute .  
where the temperature is lower than +10ºC.  
How to Clean  
● Use a dry, soft cloth when removing stains from the product.  
● Darker stains may be removed by using a soft cloth slightly moistened with water or alcohol.  
●Please observe the following precautions. Cleaning this Product without observing the precautions may cause the trouble of this Product .  
• The thermometer is not designed for fully waterproof. When removing stains, please be careful to prevent water and alcohol from entering into  
this Product and keep them away from the display.  
See the “ For Correct Measurement ”and ” How To Take Your  
Temperature ”.  
“Hi” is displayed.  
“Lo” is displayed.  
The measurement result exceeded +42ºC.  
The measurement result was +33ºC or less.  
See the “ For Correct Measurement ”and ” How To Take Your  
Temperature ”.  
• Do not soak the measurement area in alcohol or water at than 50ºC or higher to sterilize it. Do not clean the measurement area by using ultrasonic cleaning.  
• Do not use thinner, benzine, or abrasive cleaner to clean this Product.  
Other than above cases.  
The thermometer has failed.  
Please visit our website for FAQ  
• This Product is waterproofed from measurement area to 5cm away from it only. Keep the operation button and battery to prevent the water.  
Nothing is displayed on the  
display.  
Replace the old battery with a new one. If the power  
does not turn on even after the battery has been  
replaced, please visit our website for FAQ  
The battery has run out.  
The thermometer has failed.  
How to Store  
The power can not be turned on. Battery of this Product is not properly seated. If power cannot be turned on, remove the battery once  
● Dry this Proudct by using a dry cloth before storing it in the storage case.  
● If you do not intend to use this Product for a long period, be sure to remove the battery before storage.  
● Storage in the places below may cause the trouble of this Product.  
• Dusty places. Places subjected to direct sunlight, high-temperature or high-humidity. Places subjected to water or water splashes.  
• Places where a corrosive gas is generated. Places subjected to vibration and shock.  
and insert it again after 5 minutes lapse.  
● For support of this Product , please check our following site.  
 

Tascam Car Video System CD 450 User Manual
TechniSat Satellite TV System DIGITY 1 User Manual
Toshiba Laptop Z10T A1111 User Manual
Toshiba Printer B SX4 User Manual
Tricity Bendix Freezer TB 117 FF User Manual
Tripp Lite Surge Protector AV10IRG User Manual
TVS electronic Printer RP 3200 User Manual
Uniden Telephone TRU9488 User Manual
ViewSonic Digital Photo Frame DPG807 User Manual
VTech Cordless Telephone i 5836 User Manual